Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 1701/25
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 1701/25
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:1701/25
-
Estimated shipping dimensions:12.5x2x10.5cm
-
Weight:0.26 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
System family:1701 FieldMonitor
-
Input channels:2
-
Supported transducers:Velocity or acceleration transducers
-
Measurement modes:Direct, RMS, filtered and integrated values
-
Alarm processing:User-programmable setpoints
-
System communication:Measured values and status via host interface
-
Self-diagnostics:Monitor and connected-transducer integrity checks
-
Configuration rule:Single transducer type per monitor
Information
Overview
Manuals
Common Applications
Product Precautions
The distributed monitor conditions two seismic inputs, applies configured filtering or integration, compares measurements with alarm setpoints and reports values to the host control system.
- Accepts two seismic transducer inputs.
- Supports velocity or acceleration measurement configurations.
- Provides filtering and integration for selected measured variables.
- Generates alarm status and reports values to the host control system.
Use 1701/25 only in the specified monitoring chain and verify the complete signal path after controlled replacement.
Important Notice: Capture the installed 1701/25 interfaces and configuration before removal, then prove the monitored value, status and alarm path after installation.
Bently Nevada 1701/25 Manuals & Downloads
Bently Nevada 1701/25 Technical Reference (PDF)Bently Nevada 1701/25 Installation & Commissioning Guide (PDF)The first PDF covers the product function, system role and technical selection. The installation guide covers identification, connection checks, commissioning and the acceptance test results.
Bearing-housing velocity
Monitors casing vibration from velocity sensors.
Acceleration monitoring
Processes accelerometer signals for protection.
Distributed machine protection
Places monitoring close to package equipment.
Control-system trending
Supplies measured parameters and status to the host.
Before installing Bently Nevada 1701/25, confirm the specified system, interfaces and controlled configuration.
1
Confirm the complete 1701/25 marking and the specified fieldmonitor seismic input monitor position.
2
Place the affected machine protection channel in the approved maintenance state.
3
Capture the installed system family, input channels and supported transducers before removal.
4
De-energize the associated monitor, sensor supply or field circuit as the procedure requires.
5
Label every connector, conductor and shield before separation.
6
Inspect mating contacts, mounting hardware and cable condition before installation.
7
Restore the retained configuration and verify signal polarity and proportional response.
8
Function-test the complete alarm, indication and shutdown path before returning the machine to service.
Technical notes
Capture the installed 1701/25 interfaces and configuration before removal, then prove the monitored value, status and alarm path after installation.
FAQ View All FAQ
-
Which system family does Bently Nevada 1701/25 belong to?Bently Nevada 1701/25 belongs to the 1701 FieldMonitor family.
-
How many input channels does Bently Nevada 1701/25 provide?Bently Nevada 1701/25 provides 2 input channels.
-
Which supported transducers are compatible with Bently Nevada 1701/25?Bently Nevada 1701/25 supports Velocity or acceleration transducers.
-
What technical function defines the measurement modes of Bently Nevada 1701/25?The measurement modes is Direct, RMS, filtered and integrated values.
-
What is the alarm processing of Bently Nevada 1701/25?The alarm processing is User-programmable setpoints.
-
How does Bently Nevada 1701/25 implement its system communication?Its system communication is Measured values and status via host interface.
-
Which self-diagnostics apply to Bently Nevada 1701/25?The self-diagnostics are Monitor and connected-transducer integrity checks.
-
What configuration rule applies to Bently Nevada 1701/25?The configuration rule is Single transducer type per monitor.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.