21000-28-05-00-030-04-02

FAQS

• What engineering function does 21000-28-05-00-030-04-02 perform in its monitoring loop?
  21000-28-05-00-030-04-02 provides a protected mechanical path for positioning the proximity sensing assembly at the rotating-machine measurement point. Its configuration controls probe support, penetration and cable enclosure.
• Which probe family applies to 21000-28-05-00-030-04-02?
  The configured probe family for 21000-28-05-00-030-04-02 is 3300 XL 8 mm.
• What probe cable must be checked when specifying 21000-28-05-00-030-04-02?
  Use 0.5 m for the probe cable when reviewing this complete model.
• How does the standoff adapter selection affect 21000-28-05-00-030-04-02?
  This configuration identifies standoff adapter as None; include that value in the installation record.
• Which probe penetration is associated with 21000-28-05-00-030-04-02?
  The technical value is 3.0 in for the probe penetration of this model.
• What companion hardware should be confirmed for 21000-28-05-00-030-04-02?
  Confirm configured proximity probe, specified sleeve or housing interface, conduit fitting and plug arrangement.
• What is the first commissioning check for 21000-28-05-00-030-04-02?
  Set the housing and probe penetration as one mechanical stack-up before setting the final probe gap.
• Where is 21000-28-05-00-030-04-02 applied and what signal behavior should the engineer verify?
  It is used where rotating-equipment monitoring points need a protected probe installation on turbines, compressors, pumps or motors. Verify a stable response at the configured monitoring input before releasing the channel.