Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 21000-16-10-00-098-03-02
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 21000-16-10-00-098-03-02
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:21000-16-10-00-098-03-02
-
Estimated shipping dimensions:31x8.5x8.5cm
-
Weight:1.3 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Probe with Connector:3300 XL 8mm probe
-
Probe Cable Length:1.0 m (39 in)
-
Standoff Adapter:No standoff adapter
-
Probe Penetration:9.8 in (249 mm)
-
Fittings:One 3/4-14 NPT plug One 3/4-14 to 1/2-14 NPT reducer One cable seal grip with grommets for the following cable sizes: • 1/8 to 3/16 inches • 1/4 to 5/16 inches • 5/16 to 3/8 inches
-
Mounting Thread:3/4-14 NPT
Information
Overview
Manuals
Common Applications
Product Precautions
The 21000-16-10-00-098-03-02 is a protective enclosure installed externally on a machine, containing a 3300 XL 8mm probe for monitoring vibration or displacement of rotating machinery in harsh environments.
- Optional conduit fittings
- A thread seal
- An optional standoff adapter
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Bently Nevada 21000-16-10-00-098-03-02 Proximity Probe Housing Assemblies Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Oil & Gas
Monitoring radial vibration of large centrifugal compressors by penetrating thick casings with the 198mm depth.
Thermal Power
Steam turbine axial displacement protection, adjusting probe gaps within the housing to keep shaft thrust within limits.
Petrochemical
Condition monitoring of critical feed pumps, using the aluminum housing to shield electromagnetic interference.
Hydroelectric Power
Measuring shaft runout of hydro turbines, providing IP66 protection for monitoring low-speed heavy shafts in humid conditions.
Steel & Metallurgy
Blast furnace blower protection, utilizing online maintainability to fine-tune probe gaps without disassembling large units.
Pulp & Paper
Monitoring pulper and dryer bearings,protecting probe cable connections from environmental corrosion in outdoor or high-temp areas.
When using the 21000-34-10-00-078-04-02 aluminum housing assembly, the primary considerations are the precision of online adjustment and the physical stability of the long sleeve. First, given its 7.8-inch (198mm) penetration depth, it is critical to verify the casing wall thickness before installation to prevent mechanical collision between the probe and the rotating shaft, when fine-tuning the gap externally, monitor the bias voltage in real-time to lock it at the -10VDC linear center.Second, due to its aluminum construction, you should periodically inspect the surface for galvanic corrosion and ensure the Viton O-rings are intact to prevent lubricating oil leakage.Additionally, as this model features a 1.0-meter cable, it must be paired with a correctly lengthened 3300 XL extension cable. Finally, when used in hazardous areas, strict adherence to explosion-proof wiring and shielding/grounding protocols corresponding to its -34 multiple approvals is mandatory to ensure signal transmission stability.
FAQ View All FAQ
-
What is the 21000-16-10-00-098-03-02 device?It is a Bently Nevada 21000 series aluminum proximity probe housing assembly.
-
How to use products like the 21000-16-10-00-098-03-02?It is installed onto the bearing housing via its 3/4-14 NPT mounting thread. During use, technicians can precisely set the gap voltage between the probe and the shaft externally using the adjustment mechanism at the base without disassembling the machine.
-
What is the primary advantage of the 21000-16-10-00-098-03-02?The core advantage is online maintainability. It complies with the API 670 standard, allowing for probe replacement or gap adjustment while the unit is running. Its 249mm depth is ideal for extra-large, thick-walled equipment.
-
Does the 21000-16-10-00-098-03-02 include a Proximitor?No, it does not. It only includes the housing and the internal probe. You must separately configure a 3300 XL Proximitor and a 3300 XL extension cable with a matching total length (5m or 9m).
-
Can the 21000-16-10-00-098-03-02 be used in hazardous areas?Yes. The -16 option indicates that the built-in probe carries multiple international agency approvals (such as ATEX, IECEx, CSA). When used with the correct safety barriers, it is suitable for flammable and explosive environments.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.