Which installed system position is intended for 80SD100XD.C0XX-21?

Install 80SD100XD.C0XX-21 only in the documented B&R ACOPOSmicro motion position and verify the complete catalog marking against the approved hardware list.

What signal or controlled function does 80SD100XD.C0XX-21 handle?

Its documented duty is dual stepper-motor power plus x2x, digital and analog i/o data; the official record lists motor type as Two-phase bipolar stepper.

Which companion hardware must be matched to 80SD100XD.C0XX-21?

Match 80SD100XD.C0XX-21 with X2X Link controller and two compatible stepper motors, including the documented carrier, cable and project identity.

Which electrical value must be verified before wiring 80SD100XD.C0XX-21?

Verify continuous module current: 10 A. Do not transfer limits from another catalog number.

How should the configuration be preserved when replacing 80SD100XD.C0XX-21?

Record the as-found position, conductors, addressing and software revision, then restore only the approved B&R ACOPOSmicro motion configuration.

Which isolation and handling checks apply to 80SD100XD.C0XX-21?

Isolate the documented supply and field energy, use ESD controls and protect the keyed connectors before handling 80SD100XD.C0XX-21.

How should an engineer commission 80SD100XD.C0XX-21?

Power up in a controlled sequence, review device and host diagnostics, then prove the intended dual-axis feeder control function.

Can 80SD100XD.C0XX-21 replace a visually similar module without further checks?

No automatic substitution is assumed; compare the full catalog number, interfaces, axes and approved system revision.

B&R 80SD100XD.C0XX-21 ACOPOSmicro dual stepper motor module

Name: 80SD100XD.C0XX-21
Brand: B&R
SKU: 80SD100XD.C0XX-21

80SD100XD.C0XX-21

ACOPOSmicro dual stepper motor module

In Stock

Ships by Tuesday, September 22

Fast Shipping Available

Technical specifications for 80SD100XD.C0XX-21

Manufacturer:

B&R

Product Category:

General Automation

Spare Part Number:

80SD100XD.C0XX-21

Estimated shipping dimensions:

6.5 ×13.4×9.5m

Weight:

0.65 kg

Tariff Code:

8537101190

Counliy of origin:

Austria

Axes:

Motor type:

Two-phase bipolar stepper

DC bus:

24 to 64 V DC +/-25%

Continuous module current:

10 A

Communication:

X2X Link

Analog inputs:

2; +/-10 V; 13 bit

Local I/O:

Digital inputs and outputs

Information

Overview Manuals Common Applications Product Precautions

B&R 80SD100XD.C0XX-21 is acoposmicro dual stepper motor module. It drives two bipolar stepper motors and exchanges motion, digital and analog data over X2X Link.

Controls two stepper-motor axes
Uses a 24-to-64 V DC bus
Provides ten amperes continuous module current
Integrates X2X Link and local I/O

80SD100XD.C0XX-21 operates with X2X Link controller, two compatible stepper motors, 24-to-64 V DC power supply, Automation Studio motion project.

Engineered applications include Dual-axis feeder control, Compact indexing machine, X2X distributed motion, ACOPOSmicro module renewal.

Important Notice: Discharge the DC bus, record motor phases and feedback, preserve X2X identity and restore only the documented current, ramp and limit settings.

Apter Power B&R 80SD100XD.C0XX-21 Manuals and Guides

Apter Power B&R 80SD100XD.C0XX-21 Product and System Technical Reference PDF Apter Power B&R 80SD100XD.C0XX-21 Installation and Commissioning Workbook PDF

The first document presents model-specific engineering data. The second provides a separate installation, connection, commissioning and acceptance workflow.

Dual-axis feeder control

Positions two stepper-driven mechanisms.

Compact indexing machine

Provides compact motion near the machine.

X2X distributed motion

Exchanges cyclic motion and I/O data.

ACOPOSmicro module renewal

Restores a dual-axis station from the approved project.

Read the applicable B&R instructions before work. Verify 80SD100XD.C0XX-21 and the installed B&R ACOPOSmicro motion configuration.

Verify the full 80SD100XD.C0XX-21 marking and its assigned B&R ACOPOSmicro motion position before work.

Place the connected machine or process in the approved maintenance state.

Isolate the applicable supply and dual stepper-motor power plus x2x, digital and analog i/o data field energy before disconnecting conductors.

Record connector, conductor, address and software identities before removal.

Use ESD controls and protect keyed interfaces, exposed contacts and electronic assemblies.

Confirm the installed X2X Link controller and two compatible stepper motors against the approved project.

Restore power in a controlled sequence and review device, network and host diagnostics.

Prove the intended dual-axis feeder control function and retain the final test result.

FAQS

Which installed system position is intended for 80SD100XD.C0XX-21?

Install 80SD100XD.C0XX-21 only in the documented B&R ACOPOSmicro motion position and verify the complete catalog marking against the approved hardware list.
What signal or controlled function does 80SD100XD.C0XX-21 handle?

Its documented duty is dual stepper-motor power plus x2x, digital and analog i/o data; the official record lists motor type as Two-phase bipolar stepper.
Which companion hardware must be matched to 80SD100XD.C0XX-21?

Match 80SD100XD.C0XX-21 with X2X Link controller and two compatible stepper motors, including the documented carrier, cable and project identity.
Which electrical value must be verified before wiring 80SD100XD.C0XX-21?

Verify continuous module current: 10 A. Do not transfer limits from another catalog number.
How should the configuration be preserved when replacing 80SD100XD.C0XX-21?

Record the as-found position, conductors, addressing and software revision, then restore only the approved B&R ACOPOSmicro motion configuration.
Which isolation and handling checks apply to 80SD100XD.C0XX-21?

Isolate the documented supply and field energy, use ESD controls and protect the keyed connectors before handling 80SD100XD.C0XX-21.
How should an engineer commission 80SD100XD.C0XX-21?

Power up in a controlled sequence, review device and host diagnostics, then prove the intended dual-axis feeder control function.
Can 80SD100XD.C0XX-21 replace a visually similar module without further checks?

No automatic substitution is assumed; compare the full catalog number, interfaces, axes and approved system revision.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

80SD100XD.C0XX-21

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for 80SD100XD.C0XX-21

Technical specifications for 80SD100XD.C0XX-21

Information

Information