Which installed system position is intended for X67SM2436?

Install X67SM2436 only in the documented B&R X67 distributed motion I/O position and verify the complete catalog marking against the approved hardware list.

What signal or controlled function does X67SM2436 handle?

Its documented duty is two stepper-motor phase outputs plus digital/encoder feedback; the official record lists i/o supply as 24 to 38.5 V DC +/-25%.

Which companion hardware must be matched to X67SM2436?

Match X67SM2436 with X67 bus connection and two compatible stepper motors, including the documented carrier, cable and project identity.

Which electrical value must be verified before wiring X67SM2436?

Verify continuous motor current: 3 A per axis. Do not transfer limits from another catalog number.

How should the configuration be preserved when replacing X67SM2436?

Record the as-found position, conductors, addressing and software revision, then restore only the approved B&R X67 distributed motion I/O configuration.

Which isolation and handling checks apply to X67SM2436?

Isolate the documented supply and field energy, use ESD controls and protect the keyed connectors before handling X67SM2436.

How should an engineer commission X67SM2436?

Power up in a controlled sequence, review device and host diagnostics, then prove the intended indexing conveyor axes function.

Can X67SM2436 replace a visually similar module without further checks?

No automatic substitution is assumed; compare the full catalog number, interfaces, motor outputs and approved system revision.

B&R X67SM2436 Two-axis X67 stepper motor module

Name: X67SM2436
Brand: B&R
SKU: X67SM2436

X67SM2436

Two-axis X67 stepper motor module

In Stock

Ships by Tuesday, September 22

Fast Shipping Available

Technical specifications for X67SM2436

Manufacturer:

B&R

Product Category:

General Automation

Spare Part Number:

X67SM2436

Estimated shipping dimensions:

8.4x5.2x4.2cm

Weight:

0.2 kg

Tariff Code:

8537101190

Counliy of origin:

Austria

Motor outputs:

2 bipolar two-phase stepper motors

I/O supply:

24 to 38.5 V DC +/-25%

Maximum module current:

8 A

Continuous motor current:

3 A per axis

Peak motor current:

5 A per axis

Digital inputs:

2 x 3; 24 V DC sink

Encoder use:

Inputs configurable for incremental encoders

Information

Overview Manuals Common Applications Product Precautions

B&R X67SM2436 is two-axis x67 stepper motor module. It controls two bipolar stepper motors and acquires local digital or incremental-encoder feedback in an X67 station.

Drives two bipolar stepper motors
Supplies 3 A continuous current per axis
Accepts 24 V DC digital inputs
Supports incremental-encoder input configuration

X67SM2436 operates with X67 bus connection, two compatible stepper motors, 24-to-38.5 V DC power supply, motor cables and encoder wiring.

Engineered applications include Indexing conveyor axes, Dual stepper positioning, Distributed actuator station, Stepper-module replacement.

Important Notice: Record motor phase order, current limits, encoder assignment and axis parameters; isolate motor energy before disconnecting either axis.

Apter Power B&R X67SM2436 Manuals and Guides

Apter Power B&R X67SM2436 Product and System Technical Reference PDF Apter Power B&R X67SM2436 Installation and Commissioning Workbook PDF

The first document presents model-specific engineering data. The second provides a separate installation, connection, commissioning and acceptance workflow.

Indexing conveyor axes

Positions two conveyor or feeder axes.

Dual stepper positioning

Coordinates paired stepper mechanisms.

Distributed actuator station

Places motion electronics near the machine.

Stepper-module replacement

Restores motor current and encoder configuration.

Read the applicable B&R instructions before work. Verify X67SM2436 and the installed B&R X67 distributed motion I/O configuration.

Verify the full X67SM2436 marking and its assigned B&R X67 distributed motion I/O position before work.

Place the connected machine or process in the approved maintenance state.

Isolate the applicable supply and two stepper-motor phase outputs plus digital/encoder feedback field energy before disconnecting conductors.

Record connector, conductor, address and software identities before removal.

Use ESD controls and protect keyed interfaces, exposed contacts and electronic assemblies.

Confirm the installed X67 bus connection and two compatible stepper motors against the approved project.

Restore power in a controlled sequence and review device, network and host diagnostics.

Prove the intended indexing conveyor axes function and retain the final test result.

FAQS

Which installed system position is intended for X67SM2436?

Install X67SM2436 only in the documented B&R X67 distributed motion I/O position and verify the complete catalog marking against the approved hardware list.
What signal or controlled function does X67SM2436 handle?

Its documented duty is two stepper-motor phase outputs plus digital/encoder feedback; the official record lists i/o supply as 24 to 38.5 V DC +/-25%.
Which companion hardware must be matched to X67SM2436?

Match X67SM2436 with X67 bus connection and two compatible stepper motors, including the documented carrier, cable and project identity.
Which electrical value must be verified before wiring X67SM2436?

Verify continuous motor current: 3 A per axis. Do not transfer limits from another catalog number.
How should the configuration be preserved when replacing X67SM2436?

Record the as-found position, conductors, addressing and software revision, then restore only the approved B&R X67 distributed motion I/O configuration.
Which isolation and handling checks apply to X67SM2436?

Isolate the documented supply and field energy, use ESD controls and protect the keyed connectors before handling X67SM2436.
How should an engineer commission X67SM2436?

Power up in a controlled sequence, review device and host diagnostics, then prove the intended indexing conveyor axes function.
Can X67SM2436 replace a visually similar module without further checks?

No automatic substitution is assumed; compare the full catalog number, interfaces, motor outputs and approved system revision.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

X67SM2436

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for X67SM2436

Technical specifications for X67SM2436

Information

Information