-
Match the complete marking
Send photographs of the complete DSDX452L 5716075-U marking, station address switches, field connectors and any connected expansion unit.
-
Check the offered item before ordering
Compare the offered basic-unit label and low-level output configuration with the installed S400 station. Confirm the required expansion-unit pairing and included hardware in the quotation.
Technical specifications for DSDX452L 5716075-U
-
Manufacturer:ABB
-
Product Category:DCS Systems
-
Spare Part Number:5716075-U
-
Weight:2.85 kg
-
Tariff Code:8537101190
-
S400 unit class:Digital basic unit, low signal level outputs
-
Digital inputs:20
-
Input signal:24 V DC digital
-
Digital outputs:12
-
Output type:Relay, low-level signal type
-
Station communication:MasterFieldbus SDB
-
Monitoring:Power loss; startup self-test; communication
-
Expansion: digital I/O:DSDX 451 or DSDX 451L
-
Expansion: digital input:DSDI 451
-
Field connection:Two-wire connectors; no extra terminal unit
-
Address access:Switches beneath removable top lid
-
Housing:Cast aluminium chassis with plastic cover
Information
- ABB DSDX452L 5716075-U serves an Advant Master S400 remote I/O station where digital sensing and low-level relay switching share one basic-unit position. The station communicates with its process station on MasterFieldbus SDB.
Output bank: Twelve low-level signal relay outputs.
Expansion path: DSDX 451, DSDX 451L or DSDI 451 can extend the basic unit.
MasterFieldbus SDB connects the S400 basic unit with its process station. ABB specifies power-loss, startup self-test and communication monitoring for this unit. Record the existing station address, bus connection and diagnostic indication before replacing hardware.
ABB lists DSDX 451, DSDX 451L and DSDI 451 as expansion options for DSDX 452L. Match the connected expansion unit, field connectors and grouped I/O assignment. An S800 migration can reuse selected S400 wiring through a separately designed TU40x termination arrangement; it is not a direct basic-unit substitution.
DSDX452L 5716075-U Technical Reference
Apter Power technical reference for ABB DSDX 452L basic-unit functions and interfaces. PDF · 2 pages.DSDX452L 5716075-U Installation & Verification Guide
Apter Power guide for S400 wiring, expansion and functional verification. PDF · 2 pages.
Application scope: Use it where the approved S400 design calls for the same 24 V input bank, low-level output circuits and MasterFieldbus SDB connection. Check wiring and controller configuration before considering a different S400 unit or an S800 migration.
S400 remote digital station
Acquire twenty 24 V input states and switch twelve low-level relay circuits in one basic-unit position.Distributed process I/O
Connect the basic unit to the Advant Master process station over MasterFieldbus SDB.Expanded station
Pair with the approved DSDX 451, DSDX 451L or DSDI 451 expansion unit when the configured point count requires it.Field-wiring evolution
Plan any later S800 transition around the specific TU40x termination arrangement and retained S400 field wiring.
Check that the installed output loads use the DSDX 452L low-level relay configuration.
Capture switch positions and the assigned SDB station before removing the unit.
Label twenty inputs, twelve output circuits and the expansion connection separately.
Put the affected process I/O in the approved maintenance condition before disconnecting SDB.
Preserve the two-wire field connector grouping and chassis orientation.
Review power-loss, self-test and communication diagnostics, then exercise affected I/O points.
Alternative Names
Technical notes
Output compatibility: DSDX 452L is the low-level signal relay version; match the connected output circuits.
Expansion boundary: ABB lists DSDX 451, DSDX 451L and DSDI 451 for this basic unit.
Bus monitoring: The basic unit monitors power loss, startup self-test and SDB communication.
FAQ View All FAQ
-
Why does the low-level output designation matter on DSDX452L 5716075-U?It identifies the DSDX 452L relay-output variant. Compare the existing twelve output circuits and loads before replacing it with a standard DSDX 452 or another S400 unit.
-
Which expansion units can extend DSDX452L 5716075-U?ABB lists DSDX 451, DSDX 451L and DSDI 451. Confirm which unit is actually installed and preserve its channel assignments.
-
How should an SDB communication fault be isolated on DSDX452L 5716075-U?Check the station address, MasterFieldbus SDB connection and process-station diagnostics alongside the unit’s communication indication; do not treat it as an output-channel fault alone.
-
What does a startup self-test result tell the team about DSDX452L 5716075-U?It is one of the unit’s monitored conditions. A successful self-test does not replace checks of field wiring, output loads and SDB communication after installation.
-
Why should the address switches be recorded before changing DSDX452L 5716075-U?The switches sit under the accessible lid and determine station identity. Restore the approved address so the process station reaches the intended I/O position.
-
How should the two-wire field connectors be handled on DSDX452L 5716075-U?Label each connector and preserve channel grouping. ABB says S400 I/O uses two-wire connectors without an additional terminal unit.
-
Can DSDX452L 5716075-U be directly replaced by an S800 module?No direct substitution is established. ABB describes TU40x termination arrangements for staged S400-to-S800 migration; the specific wiring and I/O design must be engineered.
-
Which functional checks should close a DSDX452L 5716075-U replacement?Verify station communication and diagnostics, then test the affected 24 V input states and low-level relay output circuits against the approved process response.
Supporting new and legacy automation
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
Related cases and sourcing guidance
View all case studiesYou May Also Like
Product Browsing History
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.










