ABB DLM01 is an evidence-bounded Freelance rack link-module reference. ABB's official documentation set identifies the Process Station - Rack System engineering and installation manuals that cover DLM01. This page preserves DLM01 as the standard link-module identity while detailed electrical data remain gated to the exact manual revision.
- Model: DLM01
- System: ABB Freelance Process Station rack system
- Role: Standard rack link module
- Rack position: Dedicated link-module position - verify manual
System role: DLM01 provides the documented rack-link and power-entry role within a Freelance central or I/O unit. Only facts stated by the cited ABB official sources are published; sibling, predecessor and successor data are not transferred. Architecture boundary: One rack link module occupies the dedicated link-module position; exact power, battery and bus connections must follow the installed rack manual and drawing set. Exact revision, firmware, host, connector and field-wiring details must be checked against the physical unit and approved project documentation. For maintenance, replacement or migration work, verify the complete nameplate, companion hardware, wiring, configuration and commissioning procedure before returning equipment to service.
Important Notice: Verify DLM01, rack type, power entry, battery and DigiNet P wiring from the exact ABB rack manual before use.
Apter Power DLM01 Manuals and Guides
Important Notice: The first link is the model-specific product-parameters PDF prepared only from the cited ABB official evidence; the second link is the Apter Power product information manual. Confirm the physical nameplate, current ABB documents, and host-system requirements before installation or replacement.
Installed-base maintenanceSupports evidence-led identification and replacement planning for ABB DLM01.
Freelance rack documentationProvides a source-traceable boundary for the documented controller, I/O or link-module role.
Commissioning reviewGuides identity, companion-hardware, cable, wiring and controlled functional checks before return to service.
Migration assessmentSeparates exact-model facts from sibling modules, later remote I/O and modern controller platforms.
Read and follow the exact ABB documentation and host-equipment instructions before work. Verify the complete physical nameplate and Freelance rack configuration.
1Verify DLM01, rack type, power entry, battery and DigiNet P wiring from the exact ABB rack manual before use.
2DLM01 and DLM02 are distinct power-architecture variants; DLM02 redundancy claims must not be transferred to DLM01.
3De-energize the rack and follow the site's approved electrical and process-safety procedure before disturbing hardware or wiring.
4Back up Freelance configuration and controller data before replacement or migration work.
5Verify every rack slot, companion module, system cable, connector, termination and power source from approved drawings.
6Do not copy electrical, communication, mechanical or lifecycle values from a related model, suffix or successor.
7Perform a documented functional test and confirm diagnostics, alarms and configured fail-state behavior after work.
8Origin, HS code, dimensions and logistics weight remain unpublished without exact ABB model-level evidence.
Videos
News
Applications
