Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for G2E140-PI32-10
For more information on how your data is processed and stored by Apterpower please read our privacy policy
-
Match the complete marking
Include the complete ABB G2E140-PI32-10 marking and any hardware revision on the item. Check the fan type, supply label, connector and original cooling position.
-
Check the offered item before ordering
Request available label and connector photos. Have your maintenance team compare the offered G2E140-PI32-10 with the installed equipment and applicable ABB documents.
Technical specifications for G2E140-PI32-10
-
Manufacturer:ABB
-
Product Category:General Automation
-
Spare Part Number:G2E140-PI32-10
-
Weight:3.45 kg
-
Tariff Code:8537101190
-
ABB code:10032971
-
Product type:Long-life fan, centrifugal
-
Rated voltage:115 V AC
-
Rated frequency:60 Hz
-
Rated current:1.9 A
-
Starting current:3.8 A
-
Documented drive frame:R7i/R8i
Information
Overview
Downloads
Applications / Compatibility
Product Precautions
- ABB drive fan G2E140-PI32-10 restores forced airflow through the compatible drive cooling position using the specified 115 V auxiliary supply.
Auxiliary supply: 115 V AC, 60 Hz
Current: 1.9 A nominal; 3.8 A starting
Cooling role: R7i/R8i centrifugal fan
Current: 1.9 A nominal; 3.8 A starting
Cooling role: R7i/R8i centrifugal fan
The fan is associated with the R7i/R8i cooling arrangement in the ACS800-604LC hardware data. Its 115 V AC, 60 Hz supply must be distinguished from the adjacent 230 V fan variant before a replacement is connected.
Nominal current is 1.9 A and starting current is 3.8 A. The auxiliary circuit must support startup as well as steady operation, so a satisfactory unloaded supply measurement does not establish the condition of the circuit during acceleration.
The centrifugal fan relies on the original ducting, mounting and airflow direction. Replacing the motor without checking the air path can leave a cooling problem unresolved even when the fan runs normally.
Nominal current is 1.9 A and starting current is 3.8 A. The auxiliary circuit must support startup as well as steady operation, so a satisfactory unloaded supply measurement does not establish the condition of the circuit during acceleration.
The centrifugal fan relies on the original ducting, mounting and airflow direction. Replacing the motor without checking the air path can leave a cooling problem unresolved even when the fan runs normally.
Controller platform reference: ABB ACS800 R7i/R8i cooling. Match the auxiliary supply and installed cooling arrangement.
The original technical excerpt applicable to ABB G2E140-PI32-10 covers the exact fan supply and current table for R7i/R8i. The separate installation guide covers fan identity, auxiliary supply, airflow and thermal checks.
G2E140-PI32-10 Official Technical Excerpt
The original technical excerpt applicable to ABB G2E140-PI32-10 covers the exact fan supply and current table for R7i/R8i. PDF · 1 pages.G2E140-PI32-10 Installation & Verification Guide
Apter Power installation and verification guide covering fan identity, auxiliary supply, airflow and thermal checks. PDF · 5 pages.
Original manufacturer pages retain their technical context. Use the Apter Power guide with the applicable manufacturer instructions and approved installation design.
System and supply context: This fan belongs to the specified ABB drive cooling arrangement; code 10032971 identifies the associated spare reference.
Application scope: Apply the fan only after checking the drive frame, supply frequency, connector and mechanical air path.
Application scope: Apply the fan only after checking the drive frame, supply frequency, connector and mechanical air path.
Drive airflow restoration
Restore airflow in the applicable R7i/R8i cooling position.Auxiliary-circuit checks
Assess the 115 V supply during fan startup and steady operation.Cooling maintenance
Inspect ducts and obstructions while replacing the fan.Thermal fault diagnosis
Compare airflow and drive thermal indications after service.
Prepare ABB G2E140-PI32-10 for its configured installation using these checks.
Supply variant
Use 115 V AC at 60 Hz for this exact fan.
Starting load
Allow for the 3.8 A starting current.
Mechanical fit
Match the connector, mounting and original cooling position.
Air path
Remove obstructions and retain the original duct arrangement.
Fan safety
Keep the fan isolated while working around the impeller.
Thermal verification
Confirm cooling response under an approved operating load.
Alternative Names
G2E140 PI32 10
ABB G2E140-PI32-10
Technical notes
Signal and interface: The 3.8 A starting requirement is distinct from the 1.9 A nominal operating current.
Installation boundary: Retain the intended fan rotation, ducting and drive cooling position; matching the supply alone does not prove mechanical compatibility.
Technical basis: ABB ACS800-604LC Hardware Manual, Chinese Rev. A; ABB Long-life Fans Technical Note 3AUA0000216096 Rev. F. The G2E140-PI32-10 row identifies the 115 V, 60 Hz R7i/R8i fan. The adjacent 230 V fan ratings do not apply.
FAQ View All FAQ
-
Can G2E140-PI32-10 use the 230 V supply of an adjacent fan variant?No. This exact type is rated for 115 V AC at 60 Hz.
-
What starting current must the circuit support for G2E140-PI32-10?The starting-current reference is 3.8 A, compared with 1.9 A nominal current.
-
Which drive-frame arrangement is associated with G2E140-PI32-10?The ACS800-604LC cooling table associates it with R7i/R8i frames; verify the exact installed drive configuration.
-
What is the fan construction of G2E140-PI32-10?It is a centrifugal cooling fan rather than an interchangeable axial fan.
-
Why can a running G2E140-PI32-10 still leave a cooling fault?Blocked ducts, incorrect airflow direction or an unsuitable mounting arrangement can prevent effective cooling even when the impeller turns.
-
How should the supply be checked during startup of G2E140-PI32-10?Observe the auxiliary voltage and startup behavior at the fan circuit, then compare steady current after acceleration.
-
Which spare reference accompanies G2E140-PI32-10?ABB spare code 10032971 is associated with this fan type; retain the full fan designation when comparing the supplied item.
-
What demonstrates successful replacement of G2E140-PI32-10?Confirm secure mounting, correct airflow, stable auxiliary supply and acceptable drive thermal behavior under the approved operating test.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.