-
Match the complete marking
Match the complete ABB CDP312R marking and installed configuration. Confirm the CDP312R panel marking, keys, display and drive connection.
-
Check the offered item before ordering
Request available label and connector photos. Have your maintenance team compare the offered CDP312R with the installed equipment and applicable ABB documents.
Technical specifications for CDP312R
-
Manufacturer:ABB
-
Product Category:General Automation
-
Spare Part Number:CDP312R
-
Weight:0.16 kg
-
Tariff Code:8537101190
-
Display:LCD, 4 lines × 20 characters
-
Actual signals displayed:3 simultaneously
-
Operating modes:ACT, PAR, FUNC, DRIVE
-
Control keys:7 drive-control functions
-
Idle display return:Actual-signal mode after 1 minute
-
Default drive ID:1
-
Default download groups:1–97
-
Excluded by default:Groups 98/99 and motor-identification results
Information
- ABB CDP312R places drive status, parameter editing and controlled parameter transfer at the maintenance interface. Its operating mode determines how the arrow and ENTER keys act, while local or remote selection determines command authority.
Status context: Drive identity, reference, direction and run state
Service functions: Parameter transfer and fault-history access
Parameter editing and data transfer use different panel modes. A parameter upload retains drive values in the panel; a subsequent download must be matched to the destination firmware and motor application. Standard download handling excludes motor-identification results and the motor/option groups that require separate attention.
On a panel link with multiple drives, every station needs a distinct ID. Before issuing a start, stop, reference or reset command, confirm the selected drive and control authority. Return the drive to its required external-control state before removing the panel from a service position.
CDP312R Original Technical Excerpt
ABB ACS800 Standard Control Program Firmware Manual, 3AFE64527592 Rev. L. Selected original pages retain the relevant technical context. PDF · 10 pages.CDP312R Installation & Verification Guide
Apter Power installation workbook covering identify the selected drive, preserve the current settings, transfer only compatible parameters, testing and handover. PDF · 5 pages.
Application scope: The applications describe the complete signal or control path. Confirm the intended function and interface; accessories are supplied only when itemized.
Local commissioning
Set approved drive parameters while observing drive identity and control state.Maintenance diagnostics
Review actual signals and fault history before disturbing the installation.Controlled parameter transfer
Copy a verified source configuration to a compatible destination with separate motor and option checks.Shared panel link
Select and identify one drive at a time in an engineered multi-drive panel connection.
Read the drive ID, control-state indicator and run state before making changes. Record the firmware/application identity and establish the approved machine maintenance state. On a panel link, confirm that the station address belongs to the intended drive.
Capture the source configuration before editing or copying. Keep motor data and option-module settings separately because they are not covered by a normal groups 1–97 download. Label the backup with the installed drive identity.
Stop the destination drive and confirm matching firmware/application before downloading. Review motor and option setup separately and avoid copying a start-up state from an unrelated machine. Use the panel function indications to follow the selected transfer direction.
Use the actual-value display to compare the chosen signals with the machine state. Inspect fault history before clearing it and resolve active warnings or faults. Check that a reset does not conceal a recurring condition.
Check the required external reference and start/stop source. Return the panel to the intended remote state before removal and confirm normal supervisory control. Keep the accepted parameter record with the service handover.
Retain the final tested settings, physical connection and accepted process response for CDP312R.
Alternative Names
Technical notes
Command authority: Panel navigation does not change the responsibility for local and external control. Confirm the selected drive and control state before issuing commands.
Parameter-copy boundary: Keep a verified parameter backup and separate motor-identification and option configuration from the normal download scope.
Fault interpretation: Retain fault history before reset. Compare displayed faults with the drive state and the actual machine condition.
FAQ View All FAQ
-
Why can an assistant be unavailable on CDP312R?Check whether scalar motor control, parameter lock or disabled assistant selection is active. These conditions can prevent the Start-up Assistant from being offered.
-
What does a download from CDP312R leave outside its normal transfer scope?Motor identification results and parameter groups 98 and 99 are excluded by default. Treat motor and option configuration as a separate commissioning responsibility.
-
Why should an upload precede copying parameters with CDP312R?An upload captures the intended source settings. Downloading from an unverified panel memory can transfer settings from a different drive application.
-
How does CDP312R prevent confusion between linked drives?The status and DRIVE modes identify the selected station. Each online drive needs a unique ID, which must be confirmed before control or parameter actions.
-
Why might fault history refuse to clear on CDP312R?Active faults or warnings prevent fault-history reset. Resolve the active condition and preserve useful diagnostic information before clearing the record.
-
Which state should be restored before removing CDP312R from a drive?Return the drive to the required remote or external operating state. Removing a panel while relying on local control can interrupt the intended control arrangement.
-
Can a matching panel prove that two drives accept the same parameter copy from CDP312R?No. Verify destination firmware, application program, motor data and option configuration before transferring settings.
-
How should a changed value on CDP312R be verified after editing?Confirm the accepted parameter value, the intended drive identity and its effect on actual operation. A displayed edit alone is not proof of the complete control response.
Supporting new and legacy automation
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
Related cases and sourcing guidance
View all case studiesYou May Also Like
Product Browsing History
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.











