With more than 30.000 high-quality spare parts, they can be sold immediately. Our large inventory allows us to quickly meet customer needs, thereby reducing downtime and protecting production schedules. Our timely delivery time provides you with security and save money.
The SD854 3BSE088189R1 is a high-performance S800 I/O system power supply module manufactured by ABB. It belongs to the System 800xA family and is responsible for providing stable and high-current DC power to controllers, I/O stations, and field devices.
20% Output Power Reserves
Active Power Factor Correction (PFC)
Minimal Inrush Current Surge
The SD85x Power supply units are designed for high efficiency, electronic inrush current limitation, wide operating temperature range, and extraordinarily small size. The lowest power losses and high lifetime expectancy deliver the lowest cost of ownership. The SD85x series complies for use in potentially explosive atmospheres (IECEx Zone 2 and ATEX Zone 2). The SD85x series has a built-in power reserve and can easy breaking fuses due to high overload peak current capability.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
ABB SD854 3BSE088189R1 SD854 Power Supply 20A Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Oil & Gas
Powering control systems for large compressors to ensure uninterrupted oil and gas transportation via redundancy.
Thermal Power
Supplying 24V DC to critical trip logic and protection loops to ensure safe operation of generator sets.
Petrochemical
Acting as the main power source for DCS, driving hundreds of field transmitters and solenoid valves.
Marine
Powering load sharing and synchronization controls for marine generators in engine room automation cabinets.
Steel & Metallurgy
Providing stable power to S800 I/O stations monitoring ironmaking processes in high-EMI environments.
Mining
Powering distributed control nodes for conveyor systems to handle unstable voltage fluctuations in remote mines.
When using the SD854 (3BSE088189R1) power supply module, especially in Marine and Offshore environments, the primary considerations are thermal management and the integrity of the redundancy system. Since this module delivers a high output of 10A, it generates significant heat; therefore, a minimum ventilation clearance of 50mm must be maintained above and below the module on the DIN rail, and its use must strictly follow the derating curves relative to ambient temperature to prevent thermal overload trips. To achieve redundant power supply, it must be paired with an SS823 or SS832 voting unit, as direct paralleling of the outputs is strictly prohibited. Furthermore, given the high salt spray and vibration in marine settings, periodically check the tightness of terminal wiring to prevent poor contact, and monitor the OK LED status to ensure a stable 24V output, thereby safeguarding the power continuity of critical loads like Power Management Systems (PMS).
What are the core output parameters of the SD854 3BSE088189R1?
The standard output of this module is 24V DC, with a rated output current of up to 10A (approximately 240W of power). Compared to the 5A SD853, it can support larger-scale I/O stations.
How to use products like the SD854 3BSE088189R1?
It is mounted on a standard DIN rail, usually located in the power distribution layer of a control cabinet. Input power (100-240V AC) is connected via terminal blocks, and the output is connected to the power backplane of AC 800M controllers or S800 I/O modules.
Does the SD854 3BSE088189R1 support redundant configuration?
Yes. This is a core feature for its application in critical industrial environments. Two SD854 modules can be paired via an SS823 or SS832 voting unit to form a 1+1 redundant supply, ensuring the system remains powered if one unit fails.
What is the meaning of the LED indicators on the SD854 3BSE088189R1?
The front panel is typically equipped with an OK LED. When the output voltage is within the normal range (approx. 24V), the LED lights up green. If the light is off, it indicates an input power loss or an internal fault.
What are the primary industries for the SD854 3BSE088189R1?
It is widely used in industries requiring extremely high power continuity, such as petrochemicals, large power plant control, pulp and paper, mining, and metallurgy within process automation fields.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Videos
News
Applications
