The ABB CI801 (3BSE022366R1) is a PROFIBUS DP-V1 Communication Interface module designed for the S800 I/O system, acting as a bridge between controllers and fieldbus devices.
- Input power fused
- Hot Configuration In Run
- HART pass-through
At the system architecture level, CI801 demonstrates excellent flexibility and reliability. A single module supports connecting up to 12 S800 I/O modules, and local expansion is achieved through its built-in Modulus interface. This interface has powerful Hot Configuration (HCIR) functionality, allowing engineers to add or replace I/O modules online without interrupting the production process, greatly improving system availability.
Important Notice:
Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
ABB CI801 3BSE022366R1 COMMUNICATION INTERFACE Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Compact installation: With a depth of only 58.5 mm, it is very suitable for installation in control cabinets with limited space.
Remote diagnosis: supports collecting diagnostic and monitoring information of I/O modules, facilitating preventive maintenance and reducing downtime.
Industrial environment tolerance: The protection level is IP20, and it can operate in an environment from 0 ° C to+55 ° C, with good corrosion protection.
Distributed Control System (DCS) Expansion: CI801 can be used as ABB Ability ™ A part of the System 800xA or Freelance system that extends controller signals to industrial sites, significantly reducing costs by reducing wiring.
Complex mechanical automation: In industries such as printing, coating, stretching, and textile that require high synchronization, its communication rate of up to 12000 kbit/s ensures the stability of the production process.
Non ABB controller integration: As a standard PROFIBUS DP slave, CI801 supports communication with third-party controllers (such as Siemens PLC) to achieve open system integration.
Videos
News
Applications