With more than 30.000 high-quality spare parts, they can be sold immediately. Our large inventory allows us to quickly meet customer needs, thereby reducing downtime and protecting production schedules. Our timely delivery time provides you with security and save money.
The 83607-00-96-05-02 is a core hardware component of protection systems for large, critical rotating machinery. Manufactured in compliance with the American Petroleum Institute (API) 670 standard for mechanical configuration and temperature stability, this product is specifically utilized to monitor shaft displacement and shaft vibration across high-value industrial assets, including steam turbines, compressors, and large electric motors.
TipLoc Molding Bonding Technology
CableLoc Reinforced Structure
Backward compatibility with legacy systems
Serving as the terminal sensing node within the complete eddy current sensor monitoring chain, this component provides excellent backward compatibility across the entire product line during routine field maintenance. It not only serves as a direct replacement for legacy, non-XL 3300-series 5 mm and 8 mm sensors, but also enables plants to execute seamless hardware upgrades without altering existing monitoring architectures or Proximitor wiring, thereby significantly optimizing spare parts inventory structures and long-term cost of ownership.
In practical physical installation and supply chain field maintenance, this assembly delivers highly convenient technical characteristics. Its physical connection end is equipped with the proprietary ClickLoc gold-plated coaxial connector, allowing field technicians to achieve automatic physical locking simply by finger-tightening.
A distinct tactile and audible click is produced upon secure engagement, completely eliminating the need for specialized field tools during both installation and subsequent removal procedures. This connection mechanism is finished with a thick, corrosion-resistant plating to prevent connector loosening caused by the constant high-frequency vibration within and around the bearing housings, ensuring the long-term reliability of the physical signal path during continuous operation.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Bently Nevada 83607-00-96-05-02 Proximity Probe Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Power Generation
Monitoring shaft vibration and axial thrust displacement in large steam turbines, gas turbines, and generators to prevent catastrophic rotor-to-stator contact during high-load electricity generation.
Petrochemical & Oil Refining
Tracking the dynamic shaft movement and oil-film stability inside critical centrifugal compressors and high-pressure reactors to avoid volatile hydrocarbon leaks or unplanned refinery shutdowns.
Oil & Gas
Continuous monitoring of the heavy-duty gas turbines and centrifugal pumps at mainline compressor stations, ensuring stable physical alignment during high-volume transcontinental gas transport.
Iron & Steel Metallurgy
Installed in blast furnace turbo-blowers and hot rolling mill gearboxes to monitor extreme shaft loads, protecting mechanical components against severe thermal expansion and structural stress.
Pulp & Paper Manufacturing
Monitoring large-diameter vacuum pumps, boiler feed pumps, and high-speed dryer section bearings to manage shaft alignment and prevent breakdown under heavy moisture and steam conditions.
Cement & Building Materials
Tracking the axial expansion and radial movement of heavy-duty kiln drive gearboxes, large exhaust fans, and raw material mill shafts operating under extreme vibration and particulate stress.
When utilizing this probe, the installation gap must be strictly controlled to prevent physical impact between the tip and the rotating shaft, and the minimum bend radius of the tail cable must not be less than 30 mm. Since the probe is calibrated by default for AISI 4140 steel, a corresponding curve re-calibration is required if the field shaft is composed of alternative materials.
Furthermore, when threading the casing into the bearing housing, axial alignment of the fully threaded body must be maintained; once the ClickLoc coaxial connector is manually finger-tightened, it must be fully sealed with original protective heat-shrink tubing to block the ingress of external bearing oil mist and moisture.
The 83607-00-96-05-02 is an unthreaded eddy current proximity displacement sensor with an 8 mm tip diameter manufactured by Bently Nevada, which operates in conjunction with a Proximitor sensor and an extension cable. In terms of physical dimensions, this model features an unthreaded sleeve length of 9.6 inches (24.38 cm), a case length of 0.5 inches (1.27 cm), and a 0.5-meter (50.00 cm) 75-ohm coaxial cable without flexible stainless steel armor. Constructed with an AISI 303 or 304 stainless steel casing and a polyphenylene sulfide (PPS) encapsulated probe tip, the device utilizes the variation in the physical gap between a high-frequency electromagnetic field and a conductive target surface to convert and output a negative direct current voltage signal proportional to the distance. Furthermore, the junction between the cable and the casing accommodates a continuous tensile load of 222 N, with an operational ambient temperature range spanning -51 °C to +177 °C and a humidity tolerance of up to 100% condensing.
It is an unthreaded, non-contact eddy current proximity displacement sensor probe with an 8 mm tip diameter manufactured by Bently Nevada.
What does the 83607-00-96-05-02 primarily measure?
It primarily measures shaft vibration, axial displacement, and static shaft position in critical rotating machinery like turbines and compressors.
What is the operating principle of the 83607-00-96-05-02?
It utilizes a high-frequency electromagnetic field to generate eddy currents on a metal surface, converting the physical gap between the probe tip and the shaft into a negative DC voltage signal.
What components are required to work with the 83607-00-96-05-02?
It must be connected to a dedicated extension cable and a Proximitor sensor calibrated for an 8 mm system to form a complete operational loop.
How do you install the unthreaded 83607-00-96-05-02 probe?
Because its case is unthreaded, it cannot be screwed in directly; it must be slide-positioned and secured using external sleeve-clamping blocks or dedicated brackets.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Videos
News
Applications
