The Bently Nevada 330101-10-44-05-02-05 is a 3300 XL 8 mm Proximity Probe is designed for precise non-contact measurement of shaft vibration and displacement in rotating machinery.
- High Measurement Accuracy
- Stable Signal Output
- 3300 XL 8 mm Proximity Probes
The 3300 XL 8 mm system delivers the most advancedperformance in our eddy current proximity transducersystems. The standard 3300 XL 8 mm 5-meter system alsofully complies with the American Petroleum Institute’s (API)670 Standard for mechanical configuration, linear range,accuracy, and temperature stability.
Important Notice:
Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Bently Nevada 330101-10-44-05-02-05 3300 XL 8 mm Proximity Probes Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Compatibility: This probe must be used in conjunction with the 3300 XL series Proximitor Sensor to convert gap changes into voltage signals.
System length matching: Since the probe length is 0.5 meters, if the total length of the system is required to be 5 meters or 9 meters, you need to pair it with an extension cable of the corresponding length (such as a 330130 cable of 4.5 meters or 8.5 meters).
Installation precautions: The 4.4-inch casing is relatively long, so it is necessary to ensure that the mechanical support is stable during installation to prevent damage to the cantilever part in high vibration environments.
Due to the fact that this cable model is only 0.5 meters long, its usual application methods are as follows:
Short distance connection: The probe is directly installed on the bearing box or machine housing, connected to a nearby extension cable through a 0.5-meter cable, and then connected to the Proximitor.
Space limited location: The shorter probe housing (44mm) is suitable for installing inside the bearing seat with relatively compact space.
Typical monitoring projects:
Radial vibration (measurement of shaft swing).
Axial displacement (monitoring thrust bearing wear).
Speed measurement (key phase signal).
Videos
News
Applications
