Which installed system position is intended for 7EX290.50-1?

Install 7EX290.50-1 only in the documented B&R System 2003 expansion position and verify the complete catalog marking against the approved hardware list.

What signal or controlled function does 7EX290.50-1 handle?

Its documented duty is electrically isolated x2x link process data; the official record lists supply as 24 V DC.

Which companion hardware must be matched to 7EX290.50-1?

Match 7EX290.50-1 with System 2003 rack and separate terminal block, including the documented carrier, cable and project identity.

Which electrical value must be verified before wiring 7EX290.50-1?

Verify x2x interfaces: 1. Do not transfer limits from another catalog number.

How should the configuration be preserved when replacing 7EX290.50-1?

Record the as-found position, conductors, addressing and software revision, then restore only the approved B&R System 2003 expansion configuration.

Which isolation and handling checks apply to 7EX290.50-1?

Isolate the documented supply and field energy, use ESD controls and protect the keyed connectors before handling 7EX290.50-1.

How should an engineer commission 7EX290.50-1?

Power up in a controlled sequence, review device and host diagnostics, then prove the intended system 2003 remote i/o function.

Can 7EX290.50-1 replace a visually similar module without further checks?

No automatic substitution is assumed; compare the full catalog number, interfaces, function and approved system revision.

B&R 7EX290.50-1 System 2003 X2X Link bus controller

Name: 7EX290.50-1
Brand: B&R
SKU: 7EX290.50-1

7EX290.50-1

System 2003 X2X Link bus controller

In Stock

Ships by Tuesday, September 22

Fast Shipping Available

Technical specifications for 7EX290.50-1

Manufacturer:

B&R

Product Category:

PLC Systems

Spare Part Number:

7EX290.50-1

Estimated shipping dimensions:

11.0 ×2.0×7.0m

Weight:

0.18 kg

Tariff Code:

8537101190

Counliy of origin:

Austria

Function:

X2X Link bus controller

Supply:

24 V DC

Power consumption:

3.2 W

X2X interfaces:

Isolation:

X2X Link electrically isolated

Terminal block:

Ordered separately

Information

Overview Manuals Common Applications Product Precautions

B&R 7EX290.50-1 is system 2003 x2x link bus controller. It connects System 2003 I/O to an electrically isolated X2X Link network.

Provides one X2X Link interface
Uses a 24 V DC supply
Electrically isolates the expansion link
Connects a System 2003 station to X2X

7EX290.50-1 operates with System 2003 rack, separate terminal block, X2X Link cable, upstream B&R controller.

Engineered applications include System 2003 remote I/O, X2X migration interface, Electrically isolated expansion link, Bus-controller replacement.

Important Notice: Record X2X node and rack identities, match the separately ordered terminal block and verify all remote I/O after controlled startup.

Apter Power B&R 7EX290.50-1 Manuals and Guides

Apter Power B&R 7EX290.50-1 Product and System Technical Reference PDF Apter Power B&R 7EX290.50-1 Installation and Commissioning Workbook PDF

The first document presents model-specific engineering data. The second provides a separate installation, connection, commissioning and acceptance workflow.

System 2003 remote I/O

Extends legacy System 2003 I/O over X2X.

X2X migration interface

Interfaces old and current B&R architectures.

Electrically isolated expansion link

Separates remote-station communication electrically.

Bus-controller replacement

Restores the expansion node without changing rack addressing.

Read the applicable B&R instructions before work. Verify 7EX290.50-1 and the installed B&R System 2003 expansion configuration.

Verify the full 7EX290.50-1 marking and its assigned B&R System 2003 expansion position before work.

Place the connected machine or process in the approved maintenance state.

Isolate the applicable supply and electrically isolated x2x link process data field energy before disconnecting conductors.

Record connector, conductor, address and software identities before removal.

Use ESD controls and protect keyed interfaces, exposed contacts and electronic assemblies.

Confirm the installed System 2003 rack and separate terminal block against the approved project.

Restore power in a controlled sequence and review device, network and host diagnostics.

Prove the intended system 2003 remote i/o function and retain the final test result.

FAQS

Which installed system position is intended for 7EX290.50-1?

Install 7EX290.50-1 only in the documented B&R System 2003 expansion position and verify the complete catalog marking against the approved hardware list.
What signal or controlled function does 7EX290.50-1 handle?

Its documented duty is electrically isolated x2x link process data; the official record lists supply as 24 V DC.
Which companion hardware must be matched to 7EX290.50-1?

Match 7EX290.50-1 with System 2003 rack and separate terminal block, including the documented carrier, cable and project identity.
Which electrical value must be verified before wiring 7EX290.50-1?

Verify x2x interfaces: 1. Do not transfer limits from another catalog number.
How should the configuration be preserved when replacing 7EX290.50-1?

Record the as-found position, conductors, addressing and software revision, then restore only the approved B&R System 2003 expansion configuration.
Which isolation and handling checks apply to 7EX290.50-1?

Isolate the documented supply and field energy, use ESD controls and protect the keyed connectors before handling 7EX290.50-1.
How should an engineer commission 7EX290.50-1?

Power up in a controlled sequence, review device and host diagnostics, then prove the intended system 2003 remote i/o function.
Can 7EX290.50-1 replace a visually similar module without further checks?

No automatic substitution is assumed; compare the full catalog number, interfaces, function and approved system revision.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

7EX290.50-1

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for 7EX290.50-1

Technical specifications for 7EX290.50-1

Information

Information