Which installed system position is intended for 7CP474.60-1?

Install 7CP474.60-1 only in the documented B&R System 2003 PLC position and verify the complete catalog marking against the approved hardware list.

What signal or controlled function does 7CP474.60-1 handle?

Its documented duty is plc execution plus mixed system 2003 i/o and can data; the official record lists flashprom as 512 kB.

Which companion hardware must be matched to 7CP474.60-1?

Match 7CP474.60-1 with System 2003 rack and I/O and 24 V DC supply, including the documented carrier, cable and project identity.

Which electrical value must be verified before wiring 7CP474.60-1?

Verify power consumption: 12.6 W. Do not transfer limits from another catalog number.

How should the configuration be preserved when replacing 7CP474.60-1?

Record the as-found position, conductors, addressing and software revision, then restore only the approved B&R System 2003 PLC configuration.

Which isolation and handling checks apply to 7CP474.60-1?

Isolate the documented supply and field energy, use ESD controls and protect the keyed connectors before handling 7CP474.60-1.

How should an engineer commission 7CP474.60-1?

Power up in a controlled sequence, review device and host diagnostics, then prove the intended compact system 2003 controller function.

Can 7CP474.60-1 replace a visually similar module without further checks?

No automatic substitution is assumed; compare the full catalog number, interfaces, sram and approved system revision.

B&R 7CP474.60-1 System 2003 compact CPU

Name: 7CP474.60-1
Brand: B&R
SKU: 7CP474.60-1

7CP474.60-1

System 2003 compact CPU

In Stock

Ships by Tuesday, September 22

Fast Shipping Available

Technical specifications for 7CP474.60-1

Manufacturer:

B&R

Product Category:

PLC Systems

Spare Part Number:

7CP474.60-1

Estimated shipping dimensions:

15.2x11.7x6cm

Weight:

0.54 kg

Tariff Code:

8537101190

Counliy of origin:

Austria

SRAM:

100 kB

FlashPROM:

512 kB

Supply:

24 V DC

Power consumption:

12.6 W

Interfaces:

RS232; CAN

CAN:

Electrically isolated; network-capable

Expansion:

4 screw-in module slots

Maximum I/O:

208 digital; 80 analog

Information

Overview Manuals Common Applications Product Precautions

B&R 7CP474.60-1 is system 2003 compact cpu. It executes compact System 2003 applications and coordinates local I/O through serial, isolated CAN and screw-in interface modules.

Provides 100 kB SRAM and 512 kB FlashPROM
Coordinates up to 208 digital I/O points
Coordinates up to 80 analog I/O points
Integrates isolated network-capable CAN

7CP474.60-1 operates with System 2003 rack and I/O, 24 V DC supply, approved screw-in modules, Automation Studio application backup.

Engineered applications include Compact System 2003 controller, Mixed digital/analog machine I/O, CAN equipment integration, CPU service replacement.

Important Notice: Back up program and retained data, record screw-in modules and I/O allocation, then verify every configured channel after controlled startup.

Apter Power B&R 7CP474.60-1 Manuals and Guides

Apter Power B&R 7CP474.60-1 Product and System Technical Reference PDF Apter Power B&R 7CP474.60-1 Installation and Commissioning Workbook PDF

The first document presents model-specific engineering data. The second provides a separate installation, connection, commissioning and acceptance workflow.

Compact System 2003 controller

Runs compact machine sequences.

Mixed digital/analog machine I/O

Coordinates mixed local I/O.

CAN equipment integration

Exchanges data with CAN equipment.

CPU service replacement

Restores the CPU while retaining I/O addressing.

Read the applicable B&R instructions before work. Verify 7CP474.60-1 and the installed B&R System 2003 PLC configuration.

Verify the full 7CP474.60-1 marking and its assigned B&R System 2003 PLC position before work.

Place the connected machine or process in the approved maintenance state.

Isolate the applicable supply and plc execution plus mixed system 2003 i/o and can data field energy before disconnecting conductors.

Record connector, conductor, address and software identities before removal.

Use ESD controls and protect keyed interfaces, exposed contacts and electronic assemblies.

Confirm the installed System 2003 rack and I/O and 24 V DC supply against the approved project.

Restore power in a controlled sequence and review device, network and host diagnostics.

Prove the intended compact system 2003 controller function and retain the final test result.

FAQS

Which installed system position is intended for 7CP474.60-1?

Install 7CP474.60-1 only in the documented B&R System 2003 PLC position and verify the complete catalog marking against the approved hardware list.
What signal or controlled function does 7CP474.60-1 handle?

Its documented duty is plc execution plus mixed system 2003 i/o and can data; the official record lists flashprom as 512 kB.
Which companion hardware must be matched to 7CP474.60-1?

Match 7CP474.60-1 with System 2003 rack and I/O and 24 V DC supply, including the documented carrier, cable and project identity.
Which electrical value must be verified before wiring 7CP474.60-1?

Verify power consumption: 12.6 W. Do not transfer limits from another catalog number.
How should the configuration be preserved when replacing 7CP474.60-1?

Record the as-found position, conductors, addressing and software revision, then restore only the approved B&R System 2003 PLC configuration.
Which isolation and handling checks apply to 7CP474.60-1?

Isolate the documented supply and field energy, use ESD controls and protect the keyed connectors before handling 7CP474.60-1.
How should an engineer commission 7CP474.60-1?

Power up in a controlled sequence, review device and host diagnostics, then prove the intended compact system 2003 controller function.
Can 7CP474.60-1 replace a visually similar module without further checks?

No automatic substitution is assumed; compare the full catalog number, interfaces, sram and approved system revision.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

7CP474.60-1

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for 7CP474.60-1

Technical specifications for 7CP474.60-1

Information

Information