Which installed system position is intended for 7CP476.60-1?

Install 7CP476.60-1 only in the documented B&R System 2003 PLC position and verify the complete catalog marking against the approved hardware list.

What signal or controlled function does 7CP476.60-1 handle?

Its documented duty is plc execution plus rs232, can and system 2003 i/o data; the official record lists flashprom as 1.5 MB.

Which companion hardware must be matched to 7CP476.60-1?

Match 7CP476.60-1 with System 2003 rack and I/O and 24 V DC supply, including the documented carrier, cable and project identity.

Which electrical value must be verified before wiring 7CP476.60-1?

Verify power consumption: 12.5 W. Do not transfer limits from another catalog number.

How should the configuration be preserved when replacing 7CP476.60-1?

Record the as-found position, conductors, addressing and software revision, then restore only the approved B&R System 2003 PLC configuration.

Which isolation and handling checks apply to 7CP476.60-1?

Isolate the documented supply and field energy, use ESD controls and protect the keyed connectors before handling 7CP476.60-1.

How should an engineer commission 7CP476.60-1?

Power up in a controlled sequence, review device and host diagnostics, then prove the intended system 2003 machine controller function.

Can 7CP476.60-1 replace a visually similar module without further checks?

No automatic substitution is assumed; compare the full catalog number, interfaces, sram and approved system revision.

B&R 7CP476.60-1 System 2003 CPU

Name: 7CP476.60-1
Brand: B&R
SKU: 7CP476.60-1

7CP476.60-1

System 2003 CPU

In Stock

Ships by Tuesday, September 22

Fast Shipping Available

Technical specifications for 7CP476.60-1

Manufacturer:

B&R

Product Category:

PLC Systems

Spare Part Number:

7CP476.60-1

Estimated shipping dimensions:

15.3x11.2x6cm

Weight:

0.52 kg

Tariff Code:

8537101190

Counliy of origin:

Austria

SRAM:

750 kB

FlashPROM:

1.5 MB

Supply:

24 V DC

Power consumption:

12.5 W

Interfaces:

RS232; CAN

CAN:

Electrically isolated; network-capable

Expansion:

4 screw-in module slots

Information

Overview Manuals Common Applications Product Precautions

B&R 7CP476.60-1 is system 2003 cpu. It executes System 2003 control applications and provides isolated CAN plus serial communication and four screw-in expansion positions.

Provides 750 kB SRAM
Provides 1.5 MB FlashPROM
Integrates isolated network-capable CAN
Accepts four screw-in interface modules

7CP476.60-1 operates with System 2003 rack and I/O, 24 V DC supply, approved screw-in modules, Automation Studio application backup.

Engineered applications include System 2003 machine controller, CAN device integration, Serial equipment control, Legacy CPU replacement.

Important Notice: Back up application and retained data, identify all screw-in modules, record CAN node settings and verify I/O before production restart.

Apter Power B&R 7CP476.60-1 Manuals and Guides

Apter Power B&R 7CP476.60-1 Product and System Technical Reference PDF Apter Power B&R 7CP476.60-1 Installation and Commissioning Workbook PDF

The first document presents model-specific engineering data. The second provides a separate installation, connection, commissioning and acceptance workflow.

System 2003 machine controller

Runs installed machine logic.

CAN device integration

Coordinates CAN-connected equipment.

Serial equipment control

Maintains serial device communication.

Legacy CPU replacement

Restores a legacy controller from the approved program.

Read the applicable B&R instructions before work. Verify 7CP476.60-1 and the installed B&R System 2003 PLC configuration.

Verify the full 7CP476.60-1 marking and its assigned B&R System 2003 PLC position before work.

Place the connected machine or process in the approved maintenance state.

Isolate the applicable supply and plc execution plus rs232, can and system 2003 i/o data field energy before disconnecting conductors.

Record connector, conductor, address and software identities before removal.

Use ESD controls and protect keyed interfaces, exposed contacts and electronic assemblies.

Confirm the installed System 2003 rack and I/O and 24 V DC supply against the approved project.

Restore power in a controlled sequence and review device, network and host diagnostics.

Prove the intended system 2003 machine controller function and retain the final test result.

FAQS

Which installed system position is intended for 7CP476.60-1?

Install 7CP476.60-1 only in the documented B&R System 2003 PLC position and verify the complete catalog marking against the approved hardware list.
What signal or controlled function does 7CP476.60-1 handle?

Its documented duty is plc execution plus rs232, can and system 2003 i/o data; the official record lists flashprom as 1.5 MB.
Which companion hardware must be matched to 7CP476.60-1?

Match 7CP476.60-1 with System 2003 rack and I/O and 24 V DC supply, including the documented carrier, cable and project identity.
Which electrical value must be verified before wiring 7CP476.60-1?

Verify power consumption: 12.5 W. Do not transfer limits from another catalog number.
How should the configuration be preserved when replacing 7CP476.60-1?

Record the as-found position, conductors, addressing and software revision, then restore only the approved B&R System 2003 PLC configuration.
Which isolation and handling checks apply to 7CP476.60-1?

Isolate the documented supply and field energy, use ESD controls and protect the keyed connectors before handling 7CP476.60-1.
How should an engineer commission 7CP476.60-1?

Power up in a controlled sequence, review device and host diagnostics, then prove the intended system 2003 machine controller function.
Can 7CP476.60-1 replace a visually similar module without further checks?

No automatic substitution is assumed; compare the full catalog number, interfaces, sram and approved system revision.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

7CP476.60-1

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for 7CP476.60-1

Technical specifications for 7CP476.60-1

Information

Information