The 330103-045-00-00 is a supplied Bently Nevada identifier that begins with the 330103 metric, unarmored 3300 XL 8 mm probe family but does not follow the current manufacturer probe format 330103-AA-BB-CC-DD-EE. The exact physical configuration cannot be assigned from this shortened code alone.
- 3300 XL 8 mm metric proximity probe family
- M10 x 1
- Without armor
- 330103-AA-BB-CC-DD-EE
The official 330103 family is a non-contacting eddy-current probe used in a complete 3300 XL 8 mm system to sense distance to a conductive target for shaft vibration, shaft position, Keyphasor reference, and speed measurements. This supplied code must be verified from the nameplate before component matching. For dependable measurement, follow the official system-matching, target, mounting, cabling, environmental, and approval instructions.
Important Notice: The current official format requires five probe suffix positions. The supplied 330103-045-00-00 code is incomplete or legacy relative to that structure and must be verified.
Apter Power 330103-045-00-00 Product Manual
Important Notice: This manual is prepared and hosted by Apter Power using manufacturer-published technical data. Confirm the physical nameplate, current manufacturer documentation, and applicable certification before installation or replacement.
Nameplate Verification
Compare every suffix on the physical product with the current or applicable legacy Bently Nevada ordering record.
Legacy-System Documentation
Use serial-number and plant records to establish whether the identifier came from an older configuration convention.
Fluid-Film-Bearing Machinery
The confirmed 330103 family is used for non-contacting shaft vibration and position measurements.
Radial Shaft Vibration
A correctly identified and matched 3300 XL 8 mm system measures dynamic shaft motion.
Static Shaft Position
The complete system can measure the static gap between the probe tip and a conductive target.
Keyphasor and Speed
The confirmed family can support reference and speed applications only after exact configuration and system matching are established.
Read and follow the official 3300 XL 8 mm Proximity Transducer System datasheet and applicable installation instructions before use. Verify the complete ordering code from the physical nameplate and match all transducer components to the published system length.
1
Do not treat 045 as a cable length or probe dimension without an official record.
2
Do not select an extension cable or Proximitor Sensor until the full probe length is verified.
3
Do not infer connector, FluidLoc, armor, or protector options from this shortened code.
4
Follow the 25.4 mm bend radius and 15 mm M10 thread-engagement limits only after confirming it is a standard 330103 assembly.
5
Do not use in a hazardous area until the exact approval suffix and nameplate marking are confirmed.
Videos
News
Applications
