With more than 30.000 high-quality spare parts, they can be sold immediately. Our large inventory allows us to quickly meet customer needs, thereby reducing downtime and protecting production schedules. Our timely delivery time provides you with security and save money.
The 24710-080-00 is a standard extension cable for the 7200 Series 11mm proximity transducer system. Its primary function is to transmit the signals from the remotely mounted probe to the Proximitor without distortion.
High Signal Integrity
Extreme Environmental Resilience
Standardized System Integration
The Bently Nevada 7200 series 8mm eddy current sensor system is a non-contact gap-to-voltage system designed for highly reliable measurement of static and dynamic distances between the probe tip and the target. It features a 2.0 mm linear range and a sensitivity of 200 mV/mil. This probe is suitable for monitoring radial vibration and axial displacement in rotating machinery and is fully compatible with the Bently 3300 and 3500 systems.In terms of system architecture, this probe is not only the core of the 7200 sensing system, but also boasts excellent platform compatibility. It can be seamlessly connected to the 3300 and 3500 series mechanical protection monitoring racks via a dedicated extension cable, providing preventative maintenance data for critical rotating equipment such as steam turbines, compressors, large water pumps, and motors. This is applicable whether used to monitor bearing wear, rotor imbalance, or as a keyphasor reference signal.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Bently Nevada 24710-080-00 11mm Extension Cable Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Oil & Gas
Monitoring radial vibration signals of high-speed rotors in high-pressure environments.
Hydroelectric Power
Monitoring main shaft runout and thrust bearing conditions of large hydro turbines.
Steel & Metallurgy
Ensuring stable transmission of vibration data for blowers during long-cycle operations.
Paper & Pulp
Transmitting probe signals to 3500 monitoring systems in high-humidity environments.
Aerospace
Extending data channels during R&D testing to obtain dynamic gap parameters.
Natural Gas
Enabling remote data acquisition for critical units at unmanned booster stations.
When using the 24710-080-00 extension cable, it is critical to ensure the total electrical length matches the 11mm probe and Proximitor (typically a 9-meter system), never cut or splice the cable as it will cause measurement errors. During installation, observe the minimum bend radius limits, avoid crimping or excessive pulling against metal edges, and ensure coaxial connectors are clean, dry, and tight. Additionally, since this model lacks armor, it is highly recommended to run it through protective conduit to prevent mechanical damage or electromagnetic interference in industrial environments.
It is an extension cable for the 7200 series 11mm proximity transducer system manufactured by Bently Nevada.
What is the primary function of 24710-080-00?
Its function is to extend the distance between the probe and the Proximitor, transmitting vibration or displacement signals to the monitoring rack.
Which probe specifications is 24710-080-00 compatible with?
It is specifically designed for 7200 series probes with an 11mm diameter.
What is the operating temperature range of 24710-080-00?
Its standard rated temperature range is typically -51°C to +177°C.
Does 24710-080-00 meet API 670 standards?
Yes, the cable is designed to comply with API 670 standards for machinery protection systems.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Videos
News
Applications
