Which installed system position is intended for 3500/77M 143729-01?

Install 3500/77M 143729-01 only in the documented 3500/77M reciprocating compressor pressure system position and compare the complete catalog marking with the approved hardware list.

What field signals or controlled function does 3500/77M 143729-01 handle?

Its documented role is four reciprocating-compressor cylinder pressure signals; preserve the assigned channel, network or controller function during service.

Which companion hardware must be matched to 3500/77M 143729-01?

Match 3500/77M 143729-01 with 3500 rack and compatible cylinder-pressure transducers, including the documented rack, cable and project identity.

Which electrical rating must be checked before wiring 3500/77M 143729-01?

Verify assembly: 143729-01. Do not transfer limits from another catalog number.

What configuration should be recorded before replacing 3500/77M 143729-01?

Record the as-found position, conductors, addressing, firmware and software revision, then restore only the approved 3500/77M reciprocating compressor pressure system configuration.

Which isolation and handling controls apply to 3500/77M 143729-01?

Isolate all documented supply and field energy, use ESD controls and protect keyed connectors before handling 3500/77M 143729-01.

How should an engineer commission 3500/77M 143729-01?

Power up in a controlled sequence, review device and host diagnostics, then prove the intended recip compressor cylinder-pressure monitoring function.

Can 3500/77M 143729-01 replace a visually similar module without an engineering review?

No automatic substitution is assumed; compare the complete catalog number, interfaces, ratings and approved system revision.

3500/77M 143729-01 | Bently Nevada | 3500/77M internal-termination I/O modul

Name: 3500/77M 143729-01
Brand: Bently Nevada
SKU: 3500/77M 143729-01

3500/77M 143729-01

3500/77M internal-termination I/O module

In Stock

Ships by Monday, September 21

Fast Shipping Available

Technical specifications for 3500/77M 143729-01

Manufacturer:

Bently Nevada

Product Category:

Machinery Monitoring System

Spare Part Number:

3500/77M 143729-01

Estimated shipping dimensions:

2.3x11x24.1cm

Weight:

0.38 kg

Tariff Code:

8537101190

Counliy of origin:

USA

Complete model:

3500/77M 143729-01

Assembly:

143729-01

Termination:

Internal

Input channels:

Frequency response:

0 to 5.5 kHz

Pressure accuracy at 25 degC:

+/-0.5%

Pressure accuracy over temperature:

+/-1%

Power consumption:

7.8 W full load

Buffered output impedance:

550 ohm

Transducer supply:

+23 +/-0.8 V DC

Current limit:

24.5 mA per channel

Operating temperature:

-30 to +65 degC

Storage temperature:

-40 to +85 degC

Humidity:

95%, noncondensing

Rack occupancy:

One full-height front slot and one rear slot

Information

Overview Manuals Common Applications Product Precautions

Bently Nevada 3500/77M 143729-01 is 3500/77m internal-termination i/o module. It terminates and routes field pressure signals for four reciprocating-compressor cylinder pressure channels in a 3500 rack.

Handles four dynamic pressure channels
Covers signals from DC to 5.5 kHz
Supplies compatible pressure transducers
Provides buffered channel outputs for diagnostics

3500/77M 143729-01 operates with 3500 rack, compatible cylinder-pressure transducers, matched I/O module and field wiring, 3500 Rack Configuration Software.

Engineered applications include Recip compressor cylinder-pressure monitoring, Compressor performance analysis, Rod-load and valve diagnostic support, 3500/77M system renewal.

Important Notice: Verify 3500/77M 143729-01, front/rear assembly pairing, transducer supply, channel scale and phase reference, firmware compatibility and rack slot before work; prove all four pressure waveforms and alarms after restart.

Apter Power Bently Nevada 3500/77M 143729-01 Manuals and Guides

Apter Power Bently Nevada 3500/77M 143729-01 Product Technical Reference PDF Apter Power Bently Nevada 3500/77M 143729-01 Installation and Verification Workbook PDF

The first document presents model-specific technical and system data. The second provides a separate installation, connection, commissioning and acceptance workflow.

Recip compressor cylinder-pressure monitoring

Measures dynamic pressure through the compressor cycle.

Compressor performance analysis

Supports performance and condition assessment of cylinders.

Rod-load and valve diagnostic support

Feeds diagnostic analysis for valve and load behavior.

3500/77M system renewal

Restores a pressure-monitoring position while preserving every channel map.

Read the applicable Bently Nevada instructions before work. Verify 3500/77M 143729-01 and the installed 3500/77M reciprocating compressor pressure system configuration.

Verify the complete 3500/77M 143729-01 marking and its assigned 3500/77M reciprocating compressor pressure system position before work.

Place the connected recip compressor cylinder-pressure monitoring process in the approved maintenance state.

Isolate applicable power and four reciprocating-compressor cylinder pressure signals field energy before disconnecting conductors.

Record connector, conductor, address, firmware and software identities before removal.

Use ESD controls and protect keyed interfaces, exposed contacts and electronic assemblies.

Confirm the installed 3500 rack and compatible cylinder-pressure transducers against the approved project.

Restore power in a controlled sequence and review device, network and host diagnostics.

Prove the intended compressor performance analysis function and retain the final test result.

FAQS

Which installed system position is intended for 3500/77M 143729-01?

Install 3500/77M 143729-01 only in the documented 3500/77M reciprocating compressor pressure system position and compare the complete catalog marking with the approved hardware list.
What field signals or controlled function does 3500/77M 143729-01 handle?

Its documented role is four reciprocating-compressor cylinder pressure signals; preserve the assigned channel, network or controller function during service.
Which companion hardware must be matched to 3500/77M 143729-01?

Match 3500/77M 143729-01 with 3500 rack and compatible cylinder-pressure transducers, including the documented rack, cable and project identity.
Which electrical rating must be checked before wiring 3500/77M 143729-01?

Verify assembly: 143729-01. Do not transfer limits from another catalog number.
What configuration should be recorded before replacing 3500/77M 143729-01?

Record the as-found position, conductors, addressing, firmware and software revision, then restore only the approved 3500/77M reciprocating compressor pressure system configuration.
Which isolation and handling controls apply to 3500/77M 143729-01?

Isolate all documented supply and field energy, use ESD controls and protect keyed connectors before handling 3500/77M 143729-01.
How should an engineer commission 3500/77M 143729-01?

Power up in a controlled sequence, review device and host diagnostics, then prove the intended recip compressor cylinder-pressure monitoring function.
Can 3500/77M 143729-01 replace a visually similar module without an engineering review?

No automatic substitution is assumed; compare the complete catalog number, interfaces, ratings and approved system revision.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

3500/77M 143729-01

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for 3500/77M 143729-01

Technical specifications for 3500/77M 143729-01

Information

Information