With more than 30.000 high-quality spare parts, they can be sold immediately. Our large inventory allows us to quickly meet customer needs, thereby reducing downtime and protecting production schedules. Our timely delivery time provides you with security and save money.
The 330910-00-13-05-02-00 s a 3300 NSv Proximity Probe by Bently Nevada, specifically engineered for machinery with restricted mounting spaces or small-diameter shafts.
One 3300 XL 8 mm probe
One 3300 XL extension cable
One 3300 XL Proximitor Sensor
The 3300 XL 8 mm system delivers the most advanced performance in our eddy current proximity transducer systems. The standard 3300 XL 8 mm 5-meter system also fully complies with the American Petroleum Institute’s (API) 670 Standard for mechanical configuration, linear range, accuracy, and temperature stability. All 3300 XL 8 mm proximity transducer systems provide this level of performance and support complete interchangeability of probes, extension cables, and Proximitor sensors, eliminating the need to match or bench calibrate individual components.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Bently Nevada 330910-00-13-05-02-00 3300 NSv Proximity Probes Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Machine Tooling
Monitoring dynamic runout of precision motorized spindles to ensure machining accuracy.
Micro-turbines
Monitoring bearing support status within an extremely small mounting envelope.
Rail Traction Drives
Experimental monitoring of bearing vibration in traction motors under high-speed operation.
Centrifugal Dehydrators
Monitoring bearing wear in high-speed separators within the food or pharmaceutical industries.
Petrochemicals
Its core advantage lies in its ability to be installed in extremely narrow bearing housings without interference from side wall metal, ensuring the safe operation of critical equipment under harsh conditions.
Synthetic Fiber Spinning
Monitoring the rotational balance of high-speed godet (hot roll) spindles.
When using the 330910-00-13-05-02-00 probe, it must be exclusively paired with a 3300 NSv Proximitor to ensure accuracy—never mix it with standard 3300 XL systems. During installation, leverage its anti-side-wall interference capability to precisely calibrate the gap voltage (typically -9VDC) within confined spaces. It is critical to keep the ClickLoc connectors absolutely clean and dry while ensuring the cable shield is grounded at a single point to eliminate EMI. Additionally, as this is an unarmored model, the cable should be routed through conduit for physical protection, and the jacket should be inspected regularly for oil-induced degradation.
What is the primary use of the 330910-00-13-05-02-00?
It is primarily used to measure radial vibration, axial position, or as a Keyphasor signal to measure rotational speed.
How to correctly install the 330910-00-13-05-02-00?
The probe is installed by screwing it into a bracket. During installation, monitor the gap voltage and lock the probe at the midpoint of the Proximitor’s linear range.
What equipment must the 330910-00-13-05-02-00 be used with?
It must be connected to a 3300 NSv Extension Cable and a 3300 NSv Proximitor Sensor to function correctly.
How to maintain the 330910-00-13-05-02-00?
Regularly check the connectors for cleanliness and dryness, inspect the cable jacket for wear, and recalibrate the probe gap voltage during machine overhauls.
What is the 330910-00-13-05-02-00?
It is a 3300 NSv series eddy current proximity probe from Bently Nevada.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Videos
News
Applications
