With more than 30.000 high-quality spare parts, they can be sold immediately. Our large inventory allows us to quickly meet customer needs, thereby reducing downtime and protecting production schedules. Our timely delivery time provides you with security and save money.
The 330104-01-04-15-02-05 is an 8mm reverse-mounted eddy current probe from the 3300 XL series manufactured by Bently Nevada. It is a key front-end sensor in rotating machinery condition monitoring systems, used to measure shaft vibration, displacement, or rotational speed.
One 3300 XL 8 mm probe
One 3300 XL extension cable
One 3300 XL Proximitor Sensor
The 3300 XL 8 mm system delivers the most advanced performance in our eddy current proximity transducer systems. The standard 3300 XL 8 mm 5-meter system also fully complies with the American Petroleum Institute’s (API) 670 Standard for mechanical configuration, linear range, accuracy, and temperature stability. All 3300 XL 8 mm proximity transducer systems provide this level of performance and support complete interchangeability of probes, extension cables, and Proximitor sensors, eliminating the need to match or bench calibrate individual components. Each 3300 XL 8 mm Transducer System component is backward compatible and interchangeable with other non XL 3300 series 5 mm and 8 mm transducer system components. This compatibility includes the 3300 5 mm probe, for applications in which an 8 mm probe is too large for the available mounting space.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Bently Nevada 330104-01-04-15-02-05 3300 XL 8 mm Proximity Probess Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Oil & Gas
Installed via housing to monitor radial vibration online and prevent surge risks.
Power Generation
Measuring axial thrust position to ensure bearing oil film clearance remains within safety limits.
Hydraulic Engineering
Monitoring runout of upper and lower guide bearings to detect shaft misalignment.
Air Separation
Monitoring vibration spectra of high-speed rotors to identify blade damage or fouling.
Paper & Pulp
Monitoring micron-level displacement of support bearings in high-temperature and humid environments.
Natural Gas
Enabling automated alarms and trip interlocks for remote unmanned units.
When using the 330104-01-04-15-02-05 reverse mount probe, the priority is to ensure mechanical alignment with the probe housing and precisely calibrate the installation gap via the Proximitor’s output voltage (typically set at -10Vdc) to maintain the linear center. Due to its reverse-threaded design, ensure even torque during installation and confirm the ClickLoc connector is securely locked without over-bending the cable. Additionally, verify that the shaft material matches the calibration standard (4140 steel) and regularly inspect the housing seals to prevent oil or moisture ingress, which could lead to signal failure.
It is a 3300 XL series 8mm Reverse Mount Eddy Current Proximity Probe by Bently Nevada.
Where is the 330104-01-04-15-02-05 typically installed?
It is typically installed within 31000 or 33000 series Proximity Probe Housing Assemblies.
How to properly gap the 330104-01-04-15-02-05?
During installation, observe the Proximitor's DC output voltage (typically set to around -10V) to determine the optimal gap.
What is the primary use of 330104-01-04-15-02-05?
It is used for monitoring radial vibration, axial thrust, and speed of industrial rotating machinery.
What is the measurement principle of 330104-01-04-15-02-05?
It is based on the eddy current principle, measuring the gap to a metal surface via electromagnetic induction.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Videos
News
Applications
