Which installed system position is intended for 8I0IF109.400-2?

Install 8I0IF109.400-2 only in the documented B&R ACOPOSinverter interface position and verify the complete catalog marking against the approved hardware list.

What signal or controlled function does 8I0IF109.400-2 handle?

Its documented duty is isolated x2x link communication with acoposinverter p64new; the official record lists compatible drive as ACOPOSinverter P64new.

Which companion hardware must be matched to 8I0IF109.400-2?

Match 8I0IF109.400-2 with ACOPOSinverter P64new and X2X Link cable, including the documented carrier, cable and project identity.

Which electrical value must be verified before wiring 8I0IF109.400-2?

Verify external i/o power: 500 mW. Do not transfer limits from another catalog number.

How should the configuration be preserved when replacing 8I0IF109.400-2?

Record the as-found position, conductors, addressing and software revision, then restore only the approved B&R ACOPOSinverter interface configuration.

Which isolation and handling checks apply to 8I0IF109.400-2?

Isolate the documented supply and field energy, use ESD controls and protect the keyed connectors before handling 8I0IF109.400-2.

How should an engineer commission 8I0IF109.400-2?

Power up in a controlled sequence, review device and host diagnostics, then prove the intended p64new drive networking function.

Can 8I0IF109.400-2 replace a visually similar module without further checks?

No automatic substitution is assumed; compare the full catalog number, interfaces, b&r id and approved system revision.

B&R 8I0IF109.400-2 X2X Link interface for ACOPOSinverter P64new

Name: 8I0IF109.400-2
Brand: B&R
SKU: 8I0IF109.400-2

8I0IF109.400-2

X2X Link interface for ACOPOSinverter P64new

In Stock

Ships by Tuesday, September 22

Fast Shipping Available

Technical specifications for 8I0IF109.400-2

Manufacturer:

B&R

Product Category:

General Automation

Spare Part Number:

8I0IF109.400-2

Estimated shipping dimensions:

11.5 ×1.8×6.5cm

Weight:

0.08 kg

Tariff Code:

8537101190

Counliy of origin:

Austria

B&R ID:

0xB0E4

Compatible drive:

ACOPOSinverter P64new

X2X Link ports:

External I/O power:

500 mW

Isolation:

X2X Link isolated from inverter

Protection:

IP20

Operating temperature:

-10 to +60 degC

Information

Overview Manuals Common Applications Product Precautions

B&R 8I0IF109.400-2 is x2x link interface for acoposinverter p64new. It adds an isolated two-port X2X Link interface to an ACOPOSinverter P64new drive.

Provides two X2X Link ports
Matches the P64new drive platform
Isolates X2X communication from the inverter
Uses 500 mW external I/O power

8I0IF109.400-2 operates with ACOPOSinverter P64new, X2X Link cable, B&R controller, Automation Studio drive configuration.

Engineered applications include P64new drive networking, X2X line extension, Drive control integration, Interface-board replacement.

Important Notice: Confirm the installed drive is P64new, record X2X node and port order, isolate the DC link and verify drive communication before enabling motion.

Apter Power B&R 8I0IF109.400-2 Manuals and Guides

Apter Power B&R 8I0IF109.400-2 Product and System Technical Reference PDF Apter Power B&R 8I0IF109.400-2 Installation and Commissioning Workbook PDF

The first document presents model-specific engineering data. The second provides a separate installation, connection, commissioning and acceptance workflow.

P64new drive networking

Connects the drive to B&R machine control.

X2X line extension

Continues an X2X line through two ports.

Drive control integration

Isolates control communication electrically.

Interface-board replacement

Restores drive network identity and diagnostics.

Read the applicable B&R instructions before work. Verify 8I0IF109.400-2 and the installed B&R ACOPOSinverter interface configuration.

Verify the full 8I0IF109.400-2 marking and its assigned B&R ACOPOSinverter interface position before work.

Place the connected machine or process in the approved maintenance state.

Isolate the applicable supply and isolated x2x link communication with acoposinverter p64new field energy before disconnecting conductors.

Record connector, conductor, address and software identities before removal.

Use ESD controls and protect keyed interfaces, exposed contacts and electronic assemblies.

Confirm the installed ACOPOSinverter P64new and X2X Link cable against the approved project.

Restore power in a controlled sequence and review device, network and host diagnostics.

Prove the intended p64new drive networking function and retain the final test result.

FAQS

Which installed system position is intended for 8I0IF109.400-2?

Install 8I0IF109.400-2 only in the documented B&R ACOPOSinverter interface position and verify the complete catalog marking against the approved hardware list.
What signal or controlled function does 8I0IF109.400-2 handle?

Its documented duty is isolated x2x link communication with acoposinverter p64new; the official record lists compatible drive as ACOPOSinverter P64new.
Which companion hardware must be matched to 8I0IF109.400-2?

Match 8I0IF109.400-2 with ACOPOSinverter P64new and X2X Link cable, including the documented carrier, cable and project identity.
Which electrical value must be verified before wiring 8I0IF109.400-2?

Verify external i/o power: 500 mW. Do not transfer limits from another catalog number.
How should the configuration be preserved when replacing 8I0IF109.400-2?

Record the as-found position, conductors, addressing and software revision, then restore only the approved B&R ACOPOSinverter interface configuration.
Which isolation and handling checks apply to 8I0IF109.400-2?

Isolate the documented supply and field energy, use ESD controls and protect the keyed connectors before handling 8I0IF109.400-2.
How should an engineer commission 8I0IF109.400-2?

Power up in a controlled sequence, review device and host diagnostics, then prove the intended p64new drive networking function.
Can 8I0IF109.400-2 replace a visually similar module without further checks?

No automatic substitution is assumed; compare the full catalog number, interfaces, b&r id and approved system revision.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

8I0IF109.400-2

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for 8I0IF109.400-2

Technical specifications for 8I0IF109.400-2

Information

Information