With more than 30.000 high-quality spare parts, they can be sold immediately. Our large inventory allows us to quickly meet customer needs, thereby reducing downtime and protecting production schedules. Our timely delivery time provides you with security and save money.
The GJR2393200R1210 88TK05B-E belongs to the ABB 88TK05 station bus coupling module series for PROCONTROL systems, functioning with a power draw of 1.5W or less to manage remote data communication in industrial areas.
Supports dual-channel hot-standby redundancy
Proprietary station bus and remote bus interfaces
High-speed station bus standard rate
The module integrates a high-speed serial communication control chip based on the IEC 61131-2 standard, dedicated to processing the proprietary bus protocol of the Procontrol P14 system. It supports bidirectional asynchronous data transmission. While ensuring high-throughput data stream exchange, it utilizes an internal hardware clock to coordinate the timing of network nodes, eliminating potential packet collisions and congestion during periods of high-density network bursts.
The 88TK05B-E allows direct definition of its local network hardware address via DIP switches on the front board or through system configuration. The module features advanced communication line monitoring and bistable fault tolerance logic. If the main remote bus experiences a communication interruption due to a cable break, the module isolates the faulty link automatically and triggers local protection logic or switches to an alternate bus channel, preventing a localized network anomaly from causing spurious trips in the unit's interlocking system.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
ABB GJR2393200R1210 88TK05B-E Station Bus Coupling Module Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Thermal Power
GJR2393200R1210 88TK05B-E is used in boiler auxiliary control systems to transmit start-stop commands and status data between the local IO rack and the central control room.
Hydroelectric Power
GJR2393200R1210 88TK05B-E is applied in hydro-turbine generator governor networks to couple speed stabilization signals and guide vane parameters into the plant-wide DCS bus.
Nuclear Power
GJR2393200R1210 88TK05B-E links the non-safety class auxiliary conventional island control rack to the main network, ensuring redundant data pathing for cooling water pumps.
Petroleum Refining Industry
GJR2393200R1210 88TK05B-E connects crude oil heating furnace control stations to the terminal network to bridge fuel gas valves safety interlocks and panel alarm logs.
Iron and Steel Smelting Industry
GJR2393200R1210 88TK05B-E serves as the network bridge within blast furnace blower DCS platforms, linking air pipeline and cooling water split-valve subsystem logic.
Chemical Manufacturing Industry
GJR2393200R1210 88TK05B-E routes reactor temperature control loop data packets, bridging logical switching demands for steam and chilled water valves across the network.
When operating the GJR2393200R1210 88TK05B-E bus coupling module, set the station address DIP switches correctly to prevent network address conflicts. Prior to module insertion or extraction, verify that the rack's grounding system is connected, and perform the swap under power-off conditions or when the network is in a redundant standby state to prevent bus communication interruption. Maintain dust control and temperature regulations on-site, and regularly inspect the bus cables for physical wear and shielding integrity.
GJR2393200R1210 88TK05B-E provides the interface architecture used to link the local control station backplane to the remote network or plant-wide communication bus.
The GJR2393200R1210 88TK05B-E is a station bus coupling module manufactured by ABB, designed specifically for the Procontrol P14 power plant control system.
What is the primary function of the GJR2393200R1210 88TK05B-E?
This module connects the Procontrol station to the remote bus, enabling data communication and data stream coupling between the local system and the remote control network.
How to use products like the GJR2393200R1210 88TK05B-E in a control system?
It is inserted vertically into a designated slot of a standard 19-inch I/O rack, connected to the bus via the backplane, and configured with the corresponding station address for communication.
Do you offer global delivery services?
Yes. We ship globally, and we are able to quickly deliver parts globally to any corner of the world. Unless otherwise specified, we will ship your order via (DHL). We can also ship through FedEx, UPS, and TNT. We can also use your account.
How many parts do you have in stock?
We have an extensive stock base consisting of ten thousands of new and discontinued automation parts including those from leading manufacturers such as:Control Systems (DCS, PLC, CNC) ,Panel Controllers,HMI and Display Panels,Drives,Encoders and Resolvers,Power Supplies. If you are unable to find what you are looking for then don’t panic.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Videos
News
Applications
