With more than 30.000 high-quality spare parts, they can be sold immediately. Our large inventory allows us to quickly meet customer needs, thereby reducing downtime and protecting production schedules. Our timely delivery time provides you with security and save money.
The XMTC-62-11-0 is an online thermal conductivity binary gas transmitter. This hardware unit executes precise determination and volumetric concentration analysis of a specific gas component by measuring the differential thermal conductivity of various components within the gas mixture.
Internationally certified explosion-proof
Supporting ultra-low sample gas flow rates
Internal measurement cell with an integrated constant-temperature heating controller
In terms of system architecture, this transmitter interfaces with a sample conditioning system to receive clean, dry, and pressure-regulated sample gas from the extraction point. It resides as a field instrument within the generator hydrogen cooling and purging systems of power utilities, alongside chemical synthesis and gas distribution arrays. The unit functions by transmitting its 4 to 20 mA analog output loop to process monitors or centralized host racks, such as GE Mark VIe or XINHUA XDPS networks, to update Human-Machine Interfaces (HMI) with real-time gas volume metrics. For field maintenance and system checking, the transmitter provides direct hardware access via onboard buttons and terminal blocks located beneath its threaded enclosure cover, allowing configuration syncs and field calibration procedures without modifying the underlying plant control software.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
General Electric XMTC-62-11-0 Thermal Conductivity Binary Gas Transmitter Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Thermal Power
Measures hydrogen purity levels inside the generator casing during normal operations.
Nuclear Power
Monitors gas concentrations during the hydrogen purging and replacement cycles of the main generator conventional island.
Iron & Steel Metallurgy
Analyzes gas composition within blast furnace top gases and annealing furnace atmospheres.
Semiconductor
Monitors high-purity hydrogen gas distribution systems within cleanroom sub-fab utilities.
Coal Gasification
Monitors syngas components after initial scrubbing and filtration processes.
Marine Fuel Cell
Tracks fuel gas supply concentrations within large-scale commercial marine hydrogen storage rooms.
The sample gas must undergo complete filtration and moisture removal through a conditioning system before entry because condensate water will distort the internal thermal conductivity data. The transmitter must operate within the defined limits of 0.1 to 4.0 SCFH flow rate while the threaded cover must remain closed during powered operation in hazardous areas. Sufficient warm-up time must be allocated upon installation to allow the internal cell to reach thermal equilibrium. Finally, routine calibration requires flowing certified zero and span gases to adjust the 4 to 20 mA analog output.
This is an industrial-grade online thermal conductivity binary gas transmitter manufactured by Panametrics (Baker Hughes), which analyzes gas composition by measuring the thermal conductivity of a gas mixture.
What is the core function of the XMTC-62-11-0?
Its core function is to execute real-time monitoring of the volumetric concentration of a specific component within a binary gas mixture and convert the analysis data into a standardized 4-20 mA current signal for remote transmission.
How do you properly use a product like the XMTC-62-11-0?
It is used by mounting it on field piping close to the sampling point, connecting it to a compliant sample conditioning system, supplying 24 VDC power, and wiring the 4-20 mA output to the central control room DCS.
What are the specific requirements for the sample gas flow rate entering the XMTC-62-11-0?
The sample gas flow rate must remain steady, and the recommended sample gas flow range stated in the official technical manual is 0.1 to 4.0 SCFH (approximately 50 to 2,000 cc/min).
What are the common failure symptoms of the XMTC-62-11-0 hardware?
Common failure symptoms include abnormal 4-20 mA output current (out of bounds or dropping to zero), significant drift in measurement data, or the constant-temperature indicator displaying a heating fault.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Videos
News
Applications
