ABB DLM02 is an evidence-bounded Freelance redundant-power rack link-module reference. ABB's official documentation set identifies the Process Station - Rack System engineering and installation manuals that cover DLM02. This page preserves DLM02 as the redundant-power link-module identity while detailed electrical data remain gated to the exact manual revision.
- Model: DLM02
- System: ABB Freelance Process Station rack system
- Role: Rack link module with redundant power architecture
- Rack position: Dedicated link-module position - verify manual
System role: DLM02 provides the documented rack-link role with redundant power monitoring in a Freelance central or I/O unit. Only facts stated by the cited ABB official sources are published; sibling, predecessor and successor data are not transferred. Architecture boundary: The exact rack, dual power inputs, battery and DigiNet P connections must follow the installed rack manual, hardware revision and project drawings. Exact revision, firmware, host, connector and field-wiring details must be checked against the physical unit and approved project documentation. For maintenance, replacement or migration work, verify the complete nameplate, companion hardware, wiring, configuration and commissioning procedure before returning equipment to service.
Important Notice: Verify DLM02, rack type, both power channels, battery and DigiNet P wiring from the exact ABB rack manual before use.
Apter Power DLM02 Manuals and Guides
Important Notice: The first link is the model-specific product-parameters PDF prepared only from the cited ABB official evidence; the second link is the Apter Power product information manual. Confirm the physical nameplate, current ABB documents, and host-system requirements before installation or replacement.
Installed-base maintenanceSupports evidence-led identification and replacement planning for ABB DLM02.
Freelance rack documentationProvides a source-traceable boundary for the documented controller, I/O or link-module role.
Commissioning reviewGuides identity, companion-hardware, cable, wiring and controlled functional checks before return to service.
Migration assessmentSeparates exact-model facts from sibling modules, later remote I/O and modern controller platforms.
Read and follow the exact ABB documentation and host-equipment instructions before work. Verify the complete physical nameplate and Freelance rack configuration.
1Verify DLM02, rack type, both power channels, battery and DigiNet P wiring from the exact ABB rack manual before use.
2DLM02 is not DLM01; redundancy and diagnostic behavior must be verified against the exact hardware and manual revision.
3De-energize the rack and follow the site's approved electrical and process-safety procedure before disturbing hardware or wiring.
4Back up Freelance configuration and controller data before replacement or migration work.
5Verify every rack slot, companion module, system cable, connector, termination and power source from approved drawings.
6Do not copy electrical, communication, mechanical or lifecycle values from a related model, suffix or successor.
7Perform a documented functional test and confirm diagnostics, alarms and configured fail-state behavior after work.
8Origin, HS code, dimensions and logistics weight remain unpublished without exact ABB model-level evidence.
Videos
News
Applications
